Ground Support Test Equipment

Ground Support Test Equipment

Other Services & Offers : Adaptive services / Distribution / Calibration Services

Industry Leading Manufacturer 

Thanks to 65 years of expertise and highly qualified engineers and technicians, Barfield has developed highly reliable, user-friendly test equipment at competitive market prices.

Barfield has become a recognized worldwide market leader in GSTE, which provides quality products, dedicated technical product support and excellent customer service. A wide range of aircraft specific field quantity adapter assemblies, cables, and modules are also manufactured as part of Barfield’s product lines.

Major product lines:

  • Air Data/Pitot Static, RVSM Air Data tester - Check out our video
  • Cable tensiometer tester
  • Fuel quantity tester
  • Turbine temperature tester
  • Miscellaneous testers - Sight Compass, Megohmeter, Pressure

We also distribute the following aircraft test equipment:

  • Airbus Engineering Avionics Products
  • NDT – Imperium
  • NDT - DolphiTech
  • Pitot/Static adapters - NAVAIDS LTD

Our Calibration Services

Through the use of various standards and processes, Barfield is constantly striving to guarantee a high level of quality and flight safety. We pay attention to what our customers are saying and often work with them to achieve decreased maintenance through our product reliability program.

Click here to access our Process and Quality page to know more about our:

  • Calibration Services for Ground Support Test Equipment
  • Quality Program
  • Technical Resources 

           

An Air Data Test Set performs two basic functions:

  • Provides the means to leak test an aircraft's Pitot-Static system
  • Simulates pressure and vacuum conditions required to calibrate the airspeed, altimeter, vertical speed, manifold pressure, and engine pressure ratio (EPR) indicators.

Barfield has been manufacturing analog, digital, and RVSM Pitot Static/Air Data test sets for over 40 years. All Barfield Pitot-Static testers (Analog and Digital) are designed to meet or exceed the requirements of DOT Advisory Circular 43-203B for performing altimeter and static system tests and inspections. In addition, Barfield offers a full line of high accuracy Air Data testers (Models DPSXXX) meeting or exceeding the Aircraft OEM’s most demanding RVSM accuracy requirements. Barfield also offers the entire Nav-Aids product line of custom Pitot tube and static port adapters for most Military, Helicopter, General Aviation, Corporate Jets, and Airlines.

Barfield RVSM Testers - DPS1000

Barfield RVSM Testers - DPS1000

The DPS1000 is replacing the successful DPS350 as our low cost flight line air data test set.

The DPS1000 is Barfield’s latest fully automated, user-friendly RVSM compliant air data test set. The DPS1000 performs altimeter and static systems tests and inspections. Critical components used in the DPS1000 have a well established history of proven flight line accuracy including pumps, valves and static/altitude transducers.

To know more, check out the video! 

    • Brochure > 
    • Automated Pitot/Static &
      Air Data Test Set Specifications > 

    • Air Data Feature Chart > 
    • Instruction Manual > 
    • Download the Field Firmware Update Procedure > 
    • Software Downloads >
    • Get the apps:
  •   

Barfield Pitot-Static Testers - 1811NG

Barfield Pitot-Static Testers - 1811NG

The newly introduced 1811NG is the first fully automated pitot static tester directly supporting General Aviation, Helicopter, UAV, Non-RVSM Regional and Corporate aircraft. Critical components used in the 1811NG have well-established history of provem flight line reliability & accuracy - including case, pumps, valves, and pressure transducers.

In 2013, Barfield introduced a new and innovative feature to the 1811NG sister product the DPS1000: a first of its kind wireless tablet communication capability allowing display and control using the latest Wi-Fi technology. This wireless Wi-Fi technology is being carried through to the newest Imperium series product the 1811NG.

  • Brochure > 
  • Automated Pitot/Static &
    Air Data Test Set Specifications > 

  • Air Data Feature Chart > 
  • Instruction Manual > 
  • Download the Field Firmware Update Procedure > 
  • Software Downloads >
  • Get the apps: 
  •     

Barfield PitotStatic Testers - 1811D

Barfield PitotStatic Testers - 1811D

The Barfield 1811D is an inexpensive, portable, self-contained field tester. It is ideal for leak testing aircraft pitot and static systems or on-board testing of altimeters and airspeed indicators.

The tester uses two analog or digital instruments (Altimeter and Airspeed) to perform aircraft leak tests or instrument calibration checks. All legacy 1811 series testers are configured with hand pumps and external pressure ports for supplying the necessary pressure and vacuum needed for on-board testing.

The Barfield 1811 series pitot/static testers are very practical for new facilities or those with a limited budget. The unit includes two 25-ft. hoses, a pitot mast adapter, and a 2423F static port adapter kit.

The following is a list of available configurations.

  • 1811D405 (60-420kts, 35k ft.) analog instruments
  • 1811D605 (20-250kts, 35k ft.) analog instruments
  • 1811D403 (60-420kts, 50k ft.) analog instruments
  • 1811D603 (20-250kts, 50k ft.) analog instruments
  • 1811DA0A (20-650kts, 55k ft.) digital instruments

Digital instruments do not require correction cards.

  • Brochure > 
  • Instruction Manual >

Barfield PitotStatic Testers - 1811GA

Barfield PitotStatic Testers - 1811GA

The Barfield 1811GA testers are portable, selfcontained units, used for testing and calibrating aircraft pitot-static systems. The tester has three instruments capability for analog (Altimeter, Vertical Speed, and Airspeed) units or two digital instruments to perform aircraft leak tests or instrument calibrations.

All legacy 1811 series testers are configured with hand pumps and external pressure ports for supplying the necessary pressure and vacuum needed for on-board testing and calibration. The Barfield 1811 series of Air Data testers are practical for new facilities or for those with a limited budget. The unit includes two 25-ft hoses, a pitot mast adapter, a 2423F static port adapter kit and a pitot-static system cd-rom.

The following is a list of common configurations.

  • 1811GA425 (60-420kts, 2k ft/min, 35k ft.) analog
  • 1811GA435 (60-420kts, 3k ft/min, 35k ft.) analog
  • 1811GA445 (60-420kts, 4k ft/min, 35k ft.) analog
  • 1811GA465 (60-420kts, 6k ft/min, 35k ft.) analog
  • 1811GA625 (20-250kts, 2k ft/min, 35k ft.) analog
  • 1811GA635 (20-250kts, 3k ft/min, 35k ft.) analog
  • 1811GA645 (20-250kts, 4k ft/min, 35k ft.) analog
  • 1811GA665 (20-250kts, 6k ft/min, 35k ft.) analog
  • 1811GA423 (60-420kts, 2k ft/min, 50k ft.) analog
  • 1811GA433 (60-420kts, 3k ft/min, 50k ft.) analog
  • 1811GA443 (60-420kts, 4k ft/min, 50k ft.) analog
  • 1811GA463 (60-420kts, 6k ft/min, 50k ft.) analog
  • 1811GAAOA (20-650kts, 6k ft/min, 55k ft.) digital

Digital instruments do not require correction cards.

  • Brochure >
  • Instruction Manual >

Barfield PitotStatic Testers - 1811HA

Barfield PitotStatic Testers - 1811HA

The Barfield 1811HA testers are portable, selfcontained units, used for testing and calibrating aircraft pitot-static systems. The tester has threeinstrument capability for analog (Altimeter, Vertical Speed, and Airspeed) units to perform aircraft leak tests or instrument calibrations.

All 1811 series testers are configured with hand pumps and external pressure ports for supplying the necessary pressure and vacuum needed for on-board testing and calibration. 1811HA models come with an additional internal electric pump.

The legacy Barfield 1811 series of Air Data testers are practical for new facilities or for those with a limited budget. The unit includes two 25-ft hoses, a pitot mast adapter, a 2423F static port adapter kit and a pitot-static system cd-rom.

The following is a list of common configurations.

  • 1811HA425 (60-420kts, 2k ft/min, 35k ft.) analog
  • 1811HA435 (60-420kts, 3k ft/min, 35k ft.) analog
  • 1811HA445 (60-420kts, 4k ft/min, 35k ft.) analog
  • 1811HA465 (60-420kts, 6k ft/min, 35k ft.) analog
  • 1811HA625 (20-250kts, 2k ft/min, 35k ft.) analog
  • 1811HA635 (20-250kts, 3k ft/min, 35k ft.) analog
  • 1811HA645 (20-250kts, 4k ft/min, 35k ft.) analog
  • 1811HA665 (20-250kts, 6k ft/min, 35k ft.) analog
  • 1811HA423 (60-420kts, 2k ft/min, 50k ft.) analog
  • 1811HA433 (60-420kts, 3k ft/min, 50k ft.) analog
  • 1811HA443 (60-420kts, 4k ft/min, 50k ft.) analog
  • 1811HA463 (60-420kts, 6k ft/min, 50k ft.) analog
  • 1811HAAOA (20-650kts, 6k ft/min, 55k ft.) digital

Digital instruments do not require correction cards.

  • Brochure > 
  • Instruction Manual >

Barfield RVSM Testers - DPS500 or DPS501

Barfield RVSM Testers - DPS500 or DPS501

The DPS501 is a rack mountable Dual Channel Controller ideal for use as a transfer standard for calibration and certification of altimeters, airspeed ind., Air Data Computers, VSI and other Pitot-Static components or as an integral part of an Automatic Test Equipment (ATE) system.

The DPS500 Air Data Test Set (pictured) is a selfcontained, transportable, fully automated, user programmable Pitot-Static tester housed in a military styled enclosure. The unit includes a DPS501 controller, a Pressure/Vacuum pump, and a remote hand-terminal permitting convenient operation from the cockpit.

An optional Test Program Manager interfaces the DPS500/501 with a PC/Notebook allowing the execution of procedures for carrying out tests such as FAR 43 Appendix E, FAR 91-411, RVSM or other user programmed test routines. These user-programmed tests are created in a PC based text editor using very simple commands. Test data is tabulated and can be printed for use in QC reports or instrument calibration records.

  • Brochure > 
  • Instruction Manual >

Barfield Digital Instruments - DALT55 & DAS650

Barfield Digital Instruments - DALT55 & DAS650

The aviation industry has an enormous need for more reliable and cost effective tools for performing standard pitot-static system leak tests, FAR 91-411 and/or FAR 43 Appendix E certifications. These needs motivated Barfield to design and produce digital replacement instruments for the Barfield 1811 series and equivalent testers.

The DALT55 Digital Altimeter and the DAS650 Digital Airspeed indicator were designed to be a direct replacement to the current analog instruments. Being of similar shape and size of existing analog instruments, the new digital version fits all Barfield 1811 series and most other manufacturers of analog pitot-static test sets.

Standard analog instruments provided in a Barfield 1811 series or equivalent pitot-static tester are delicate mechanical devices easily damaged or destroyed by inexperienced or distracted technicians. The DALT55 and DAS650 use state-of- the-art transducer technology for pressure measurements making them virtually immune to the frequent and costly repairs generally associated with analog instruments.

  • Brochure > 
  • Instruction Manual DALT55 > 
  • Instruction Manual DAS650 > 

ADTS553F

ADTS553F

ADTS553F - Wireless ADTS500 Series easy-to-use pitot static testers

  • The ADTS553F air data test set is a portable three-channel flightline pitot static tester. It provides pitot static air data validation, leak testing, fault-finding and avionics instrumentation testing forany aircraft requiring angle of attack two off static-controlled channels, in addition to a pitot test channel. The ADTS553F can also be used as a standard two-channel flightline air date test set. 
  • Brochure >

Accessories NAV-Aids Ltd - nav

Accessories NAV-Aids Ltd - nav

Pre-Test Probes

The pre-testers are employed to verify the integrity of the pitot test adapter, hoses and air data test set prior to connection to the aircraft. The probe is inserted into the pitot test adapter while connected to the hose and air data test set. By applying pneumatic pressure, the entire assembly (tester, hoses & adapters) are checked for leakage.

Pitot Test Adapters

The pitot test adapter body is of solid uni-body construction. There is no metal to metal contact between pitot tube and test adapters. Seals and spacers inside the adapter body ensure a leak free connection. They are easily exchanged without special tools. Optional high temperature seals and spacers can be installed upon request.

Static Test Adapters

Static test adapters provide a connecting seal at the aircraft’s static ports. The means of attachment depend on the aircraft type. Installation and removal of our adapters takes just a few seconds.

Air Data Accessory Kits

Air data accessory kits contain all the required test adapters and hoses to connect the air data test set to the aircraft type for which the kit is designed. Also included as standard equipment are pre-test adapters, seal kits and lubrication fluid. Depending on the need, additional equipment such as control consoles and suspension arms are a part of the kit. RVSM Air data accessory kits are available.

  • Brochure > 

The CT12A Cable Tensiometer is the latest Ground Support Test Equipment manufactured by Barfield. Developed in cooperation with a major aircraft OEM, the Barfield CT12A Cable Tensiometer has been engineered to comply with new specifications.

Used by OEMs, MROs and operators, the CT12A provides highly accurate and precise readings over a wide range of cable sizes. Barfield has combined technology with hand held ease in this vital tool used during cable rigging and routine tension measurements for all aircraft types.

Cable tensiometer tester - CT12A

Cable tensiometer tester - CT12A

The Barfield CT12A Digital Cable Tensiometer was designed to meet the industry’s requirements for testing and measuring the tension of aircraft cables. The CT12A measures the existing tension in 1/16” to 1/4” cables. Two different unit types are available within the product line: multi-cable and single-cable. Multi-cable units can measure up to seven different cable sizes; whereas single-cable units are customized for one specific cable size. The CT12A displays the battery life, last measured cable size, ambient temperature and cable tension.

The Barfield instrument allows users to perform an entire testing operation with one hand and without the use of conversion tables. Measurements are taken once the proper cable size is selected and when the tool is clamped onto the cable. The instrument’s display then shows the resulting measurement.

Both the multi-cable and single-cable units feature two modes of cable tension measurement: Standard Mode and Averaging Mode. Standard Mode gives individual cable tension measurements. Averaging Mode automatically averages three measurements.

  • Brochure > 
  • Instruction Manual >

Fuel capacitance systems are separated into two broad groupings, AC capacitance and DC capacitance. The source of these names derives from the type of signal processed by the fuel system amplifier. Barfield designs a universal tester for each type of system with the proper interface harnesses to access individual aircraft applications. Some of the various test and measurements include:

  • Insulation - Testing the wiring and probes
  • Fuel Tank Capacitance Measurement
  • Individual Probe Capacitance Measurement
  • Capacitance Simulation - Indicators and amplifiers
  • Indicators - Bench testing of remote units

Contrary to popular belief, there is no "black magic" in troubleshooting and calibrating fuel capacitance systems, but only if you have the right equipment!

Fuel quantity testers - DC400A

Fuel quantity testers - DC400A

The compact and lightweight DC400A is a complete fuel quantity system test set for use on aircraft that have probes with integral diode rectification, commonly called “DC” fuel quantity systems.

The DC-400A is a completely self-contained, portable, lightweight, internal battery powered DC fuel quantity system Test Set. The tester is specifically designed, when used with the proper Adapter Module, to meet the requirements for testing and calibration of a wide range of Aircraft DC Fuel Quantity Systems. 

The DC400A has been engineered to provide the technician the following capabilities: Capability to bench check Aircraft fuel quantity system components.

Capability to test all major components and circuitry in the Aircraft’s DC fuel quantity system. Provides direct digital LCD readout of probe capacitance.

Digital readout of quantity system output in (volts, lb., ratio, etc.).

Maximum ease of operation and maintenance.

Fuel quantity testers - DFQ40K

Fuel quantity testers - DFQ40K

The DFQ40K is designed for and is compatible with all aircraft, which have AC capacitance, based Fuel Quantity Indicating Systems including those equipped with transient suppressors.

The DFQ40K has the ability to measure the insulation breakdown of tank units, wiring and connectors associated with the system, capacitance of the tank units which measure the level of fuel in the tanks and simulation of capacitances required to test and calibrate the aircraft indicating system. In addition to performing the standard capacitance tests of the Tank(s) and or Compensator, the DFQ40K has an additional troubleshooting mode that will provide the user with a relative indication of a problem associated with the Phase of the return current like that provided by the Barfield 2548H tester. The DFQ40K measures Low Resistances, DC Voltage & Indicator Drive Current. The DFQ40K is also equipped to measure the Distance To Fault to localize problems with the HIZ coax, continuity of the Shield Monitor, if the aircraft is so equipped, and Bonding tests to 0.001 Ohm resolution.

With the incorporation of the BACK, NEXT, MODE and RANGE pushbuttons to the panel membrane, switching the overall number of different screens, such as sub-menus to be displayed, is greatly reduced. This will simplify the screens and make it easier for the operator to learn and navigate. This also makes it possible to remove all pre-defined FUNCTION pushbuttons and embed those functions into the Soft Function key selection scheme.

  • Brochure > 
  • Instruction manual > 

Fuel quantity testers - 8000

Fuel quantity testers - 8000

NO LONGER PROCURABLE

  • Replaced by DFQ40K 
  • Instruction Manual > 

Fuel quantity testers - AC2K

Fuel quantity testers - AC2K

NO LONGER PROCURABLE

  • Replaced by DFQ40K 
  • Instruction Manual >

Fuel quantity testers - 2548H

Fuel quantity testers - 2548H

NO LONGER PROCURABLE

  • Replaced by DFQ40K
  • Instruction Manual > 

Barfield has been manufacturing Turbine Temperature Indicating System Test Sets for more than 40 years, and has amassed a vast knowledge of the common thermocouple EGT systems.
All Turbine Temperature test sets offered by Barfield meet the requirements for testing aircraft Type K (Chromel - Alumel) thermocouple systems and are capable of conducting the following tests:

  • System Resistance and Insulation Testing
  • Hermocouple Resistance
  • Thermocouple Output Simulation for Indicator Accuracy Test

A typical aircraft Exhaust Gas Temperature (EGT) system consists of between 4-16 Type K (Chromel - Alumel) thermocouples, which are mounted parallel to each other. As the temperature increases in the engine exhaust, a voltage is induced in the thermocouple. Since the thermocouples are also electrically connected in parallel, the individual thermocouple voltages are averaged together to get a more precise voltage output and temperature indication. The voltages induced in a thermocouple are very small 40microvolts/degree (40uV/degree) and require very precise test equipment.

Turbine Temperature testers - TT1000A

Turbine Temperature testers - TT1000A

The TT1000A is a completely self-contained, battery powered, aircraft turbine temperature system tester capable of measuring system lead resistance, insulation, and performing indicator run-outs with a range up to1000 °C. The unit was specifically designed to meet all requirements for testing aircraft Chromel/Alumel (CH/AL) turbine temperature measuring systems and provides an accurate display of thermocouple outputs in degrees Celsius (°C).

The TT1000A is engineered for maximum ease of operation and includes an automatic digital display that practically eliminates human error and reduces testing time to a minimum. The test leads incorporate automatic temperature compensation to remove induced voltage caused by a “Cold Junction” created when the test leads are attached to the aircraft.

All of the features designed into the TT1000A have been added to reduce maintenance time and cost as well as provide a maintenance friendly tester for measuring and displaying resistance of thermocouple, thermocouple rings and system lead circuits..

  • Brochure > 
  • Instruction Manual >

Turbine Temperature testers - TT1200A

Turbine Temperature testers - TT1200A

The Barfield TT1200A is our latest Digital Turbine Temperature Test Set. It is microprocessor based, completely self-contained, battery powered unit housed in a new high visibility ruggedized enclosure. It is designed with sufficient accuracies and range to be able to test the newest digital and glass cockpit indicators with simple operation, direct reading, and multi-function versatility.

The TT1200A is specifically designed to accomplish all requirements for testing the aircraft Chromel/ Alumel (K type) turbine temperature measuring systems. The Test Set can measure resistances down to 0.001Ω, measure insulation up to 200MΩ, perform indicator run-outs with a resolution of .1°C or 1°C and a range of 1372°C. It can also display the equivalent °F or millivoltages and may be used as a master indicator.

The TT1200A exceeds all of the operational capabilities of the popular Barfield TT1000A. Many new features include: microprocessor based, backlit alphanumeric display, user prompts, °F and millivoltage display, temperature range to 1372°C, 4 resistance and 4 insulation ranges and power comes from common “C” batteries for all functions.

  • Brochure > 
  • Instruction Manual > 

Turbine Temperature testers - 2312G

Turbine Temperature testers - 2312G
  • NO LONGER PROCURABLE
  • Replaced by TT1000A or TT1200A
  • Instruction Manual > 

Turbine Temperature testers - TT1200

Turbine Temperature testers - TT1200
  • NO LONGER PROCURABLE
  • Replaced by TT1200A
  • Instruction manual > 

NDT - CREAFORM HANDYSCAN 3D

NDT - CREAFORM HANDYSCAN 3D

The HandySCAN 3D handheld scanner has been optimized to meet the needs of product development and engineering professionals on the lookout for the most effective and reliable way to acquire 3D measurements of physical objects. Connected to a laptop computer where the analyzed surface is displayed in real time and 3D, the HandySCAN 3D scanner provides a detailed inspection to gauge the extent of a damage caused by hail impacts on aircraft fuselages.

It delivers higher-quality results than manual inspection, examining each of the dents identified and taking exact measurements of their length, width and depth. Moreover, a manual inspection takes 4-5 hours per square meter while it only takes 30 minutes with 3D inspection, which means an 80% reduction in inspection time and in the related costs.

  • Brochure >

Barfield has maintained its leadership in the aviation industry by manufacturing an excellent line of products in addition to Pitot/Static, Fuel Quantity, and Turbine Temperature testers.  Our miscellaneous category includes a wide range of other testers designed to meet today's specific aviation industry needs. These testers include pressure testing, backup compass testing and Automatic Test Equipment (ATE) for component maintenance. These test platforms are very reliable and combine state-of-the-art technical concepts with the latest philosophical requirements in the industry.

Miscellaneous testers - 2311FA

Miscellaneous testers - 2311FA

The 2311FA Pressure Tester field tests aircraft pressure systems for both reciprocating and turbine engine pressure systems. It provides pressure for testing pressure transmitters, warning switches pressure-type torque (BMEP) indicators and system leak testing in the range of 0-600 PSI.

The use of VITON (Fluro-carbon) seals on the piston permits the use of any fuel, lubricating or hydraulic fluid. The principal NON-COMPATIBLE fluids NOT to be used with VITON seals are: alcohol’s, aldehydes, amines, alkyl phosphate esters (skydrol), ethers and ketones.

  • Brochure > 
  • Instruction manual >

Miscellaneous testers - SC063

Miscellaneous testers - SC063

The SC063 is a portable, self-contained calibration device used to check the mounted aircraft compass. Consisting of a modified aircraft compass which has been re-screened to indicate 180 degrees from normal. The SC063 allows the operator to stand facing the aircraft, making it considerably easier to transmit signals to and from the aircraft cockpit. The SC063 is unique in that the compensating magnets have been removed and a combination magnifying lens and collimating sight added. 

The sight compass is painted orange and a caution label is attached to prevent inadvertent installation in an aircraft. Each unit is painted orange for clear identification and must not, under any circumstances, be used as an aircraft compass

  • Brochure > 
  • Instruction Manual >

Miscellaneous testers - 2471F

Miscellaneous testers - 2471F

NO LONGER PROCURABLE

  • Brochure >
  • Instruction Manual >

Barfield is also a distributor for 6 Test Equipment manufacturers. In addition to the complementary testers from Tel-Instruments Electronics Corp. and accessories from Nav-Aids for its Air Data/Pitot static testers, Barfield also distributes.

Airbus Engineering Avionics Products testers - G5-5M0-319-0000

Airbus Engineering Avionics Products testers - G5-5M0-319-0000

Main Landing Gear Wheel Tachometer Driving Tool

  • Control the rotation direction of the motors
  • Control the speed of the motors
  • Check the RPM of the motors
  • Unit is supplied eith 28VDC and protected by a 5A fuse
  • Drive motor support drives landing gear tachometer generators means of drive shafts

Airbus Engineering Avionics Products testers - G5-5M0-321-0000

Airbus Engineering Avionics Products testers - G5-5M0-321-0000

Check Doors Tool

  • Adjustment of Eldec proximity detector for FAR and NEAR configurations
  • Check PETERCEM proximity detectors
  • Self dependent by means of 18VC power supply
  • Check of cargo compartment doors locked position indicating section

Airbus Engineering Avionics Products testers - G5-5M0-320-0300

Airbus Engineering Avionics Products testers - G5-5M0-320-0300

28 VDC Power Supply Tool

  • Activate side stick solenoid to enable the adjustment of transucer unit input lever
  • Simulate auto pilot mode to check operation of spring rod in artificial feel unit
  • Models available for A319, A320, A321
  • Models available for A330, A340
  • Models available for A340-500-600

DolphiCam by Dolphitech

DolphiCam by Dolphitech

DolphiCam: advanced ultrasound-based camers for 2D and 3D identification, inspection and analysis of defects in composite materials

  • DolphiCam is a mobile and ergonomic ultrasound camera system designed for NDT inspection of CFRP ( Carbon Fiber Reinforced Plastics) creating high-resolution 2D and3D images of suspected damege areas. 
  • Brochure > 

Seats and Seat Parts - STELIA

Seats and Seat Parts - STELIA

Barfield provides complete sales and technical support for new cockpit and cabin class seats, and has an extensive inventory of piece parts ready to ship including AOG services.

  • Cockpit / Technical seats: Airbus, Hawker / Beech, Learjet
  • Cabin Attendant / Crew Seats: Airbus, Boeing, Fokker
  • First Class and Business Class seats: ULTIMATE 17, SOLTYS, COMET, EQUINOX, CELESTE, Sales & Support

Smoke Detection System - SIEMENS

Smoke Detection System - SIEMENS

A smoke detection system:

  • Line Maintenance System
  • Conversions and Completions
  • IFE / Interconnectivity Protection

Deploying optical smoke detection safety:

  • "Open air" multi-purpose detectors using natural propagation of the air.
  • "Flow-thru" multi-points detectors sampling air through a range of sniffers and fans.
  • "Duct" for electronic and avionics bays, using Venturi effect to sample air.

Litef

Litef

Barfield has been a strategic partner with Litef in the Americas for over 25 years. The company specializes in the FCDC Flight control Data Concentrator for the A320 family of aircraft.

Barfield offers:

  • New LRU Sales
  • Repair services
  • OEM warranty
  • AOG support

OLAER

OLAER

Barfield is the exclusive distrutor of Olaer products in the Americas. As the oldest manufacturer of hydraulic accumulators, Olaer provides a full range of bladder accumulators, and membrane accumulators.

  • All LRU's and piece parts available
  • Adaptable high flow fluid ports
  • Wide pressure range
  • Adaptation low and high temperatures
  • Horizontal or vertical installation

ELTA

ELTA

ADT406 AF Automatic/Fixed ELT:

  • Automatic (G-Switch) activation
  • 3 position guarded switch (Off/Armed/On)
  • Visual & aural activation alerts
  • No scheduled maintenance - 5 years
  • Encodes all four ID protocols
  • Integrated to A/C antenna / cockpit panel

ADT406 S Survival ELT:

  • Manuel or water activation (fresh or saltwater)
  • Stable flotation capability
  • 3 position guarded switch (Off/Armed/On)
  • Visual & aural activation alerts
  • No scheduled maintenance - 5 years
  • Encodes all four ID protocols

ADT406 AP Automatic/Portable ELT:

  • Automatic (G-Switch) activation
  • 3 position guarded switch (Off/Armed/On)
  • Visual & aural activation alerts
  • No scheduled maintenance - 5 years
  • Encodes all four ID protocols

Lavatory faucet / Faucet elements - Erie Aviation

Lavatory faucet / Faucet elements - Erie Aviation

Lavatory faucet - Specifications:

  • Replaces Adams Rite or Franke Aquarotter
  • Self-Closing Faucet
  • Weighs less than Adam Rite and Frank Aquarotter
  • PMA Approved
  • Finishes available Standard Matte or Custom Colors
  • Single or Dual Temperature available
  • 3-year Manufacturer's Warranty
  • Made in USA - Erie, PA

CLEANO

CLEANO

Barfield is now the official national and international distibutor of Cleano for its Aviation Grade projects.
Cleano is a new non-hazardous, biodegradable Super Concentrated cleaner with a wide variety of uses that will not harm the environment.

  • Certified by Boeing (#D6 - 17487)
  • Cleano causes no deterioration, corrosion or discoloring and leaves no residue or stains on aircraft and aircraft parts.
  • While it safely and effectively cleans the exterior of your aircraft without damaging paint or primer, it can also be used around the hangar for other jobs.
  • It’s your “all-in-one” multipurpose cleaner and degreaser that’s strong on dirt, but gentle on you.

Brochure > 

Below is a list of User Instruction Manuals for Test Sets. The Instruction/Operation Manuals are sorted alphabetically by product type, then by Model number.This list is updated monthly. Last update: 02/15/17

AC Fuel Quantity Test Set

AC Fuel Quantity Test Set

Model: 8000

Barfield P/N: 101-00540

Doc. No. - Rev.: 56-101-00540-B 

Latest Update: Nov/07/14

DC Fuel Quantity Test Set

DC Fuel Quantity Test Set

Model: DC400A 

Barfield P/N: 101-0085

Doc. No. - Rev.: 56-101-00850-C   

Latest Update: Nov/07/14

Digital Air Data Tester

Digital Air Data Tester

Model: DPS500

Barfield P/N: 101-01190

Doc. No.: 56-101-01190_01191-C 

Latest Update: Nov/07/14

Digital Dual Channel Control

Digital Dual Channel Control

Model: DPS501

Barfield P/N: 101-01191

Doc. No. - Rev.: 56-101-01190_01191-B                   

Latest Update: May/07/09                                                                                    

Digital Cable Tensiometer

Digital Cable Tensiometer

Model: CT12A

Barfield P/N: 101-03100

Doc. No. - Rev.: 56-101-03100-G 

Latest Update: Mar/06/15 

Digital Fuel Quantity Tester

Digital Fuel Quantity Tester

Model: AC2K

Barfield P/N: 101-01401

Doc. No. - Rev.: 56-101-01401-B 

Latest Update: Nov/17/14

Digital Pitot-Static Test Set

Digital Pitot-Static Test Set

Model: DPS350

Barfield P/N: 101-01170

Doc. No. - Rev.: 56-101-01170-F 

Latest Update: Nov/07/14

Digital Pitot-Static Test Set

Digital Pitot-Static Test Set

Model: DPS400

Barfield P/N: 101-01180 (Prior to Mod. P)

Doc. No. - Rev.: 56-101-01180-B1 

Latest Update: Jan/07/10

Digital Pitot-Static Test Set

Digital Pitot-Static Test Set

Model: DPS400

Barfield P/N: 101-01180 (Mod. P and later)

Doc. No. - Rev.: 56-101-01180-D     

Latest Update: Jan/19/10

Fuel Quantity Test Set

Fuel Quantity Test Set

Model: 2548H

Barfield P/N: 101-00420

Doc. No. - Rev.: 56-101-00420-C  

Latest Update: Nov/07/14

Fuel Quantity Test Set

Fuel Quantity Test Set

Model: DFQ40K

Barfield P/N: 101-01501/01502    

Doc. No. - Rev.: 56-101-01501_01502-C  

Latest Update: Nov/07/14

Megohmmeter

Megohmmeter

Model: 2471F

Barfield P/N: 101-00220

Doc. No. - Rev.: 56-101-00220-C  

Latest Update: Nov/07/14

Pitot-Static Test Set

Pitot-Static Test Set

Model: 1811D

Barfield P/N: 101-00164

Doc. No. - Rev.: 56-101-00164-G   

Latest Update: Nov/07/14

Pitot-Static Test Set

Pitot-Static Test Set

Model: 1811HA

Barfield P/N: 101-00184

Doc. No. - Rev.: 56-101-00184_00185-I 

Latest Update: Sep/24/14

Pitot-Static Test Set

Pitot-Static Test Set

Model: 1811GA

Barfield P/N: 101-00185      

Doc. No. - Rev.: 56-101-00184_00185-I

Latest Update: Sep/24/14

Pitot-Static Test Set 1811NG

Pitot-Static Test Set 1811NG

Model: 1811NG

Barfield P/N: 101-01178 

Doc. No. - Rev.: 56-101-01178-I  

Latest Update: October/10/17

Pitot-Static Test Set DPS1000

Pitot-Static Test Set DPS1000

Model: DPS1000 

Barfield P/N: 101-01175 

Doc. No. - Rev.: 56-101-01175-I 

Latest Update: October/10/17

 

Pressure Tester

Pressure Tester

Model: 2311FA

Barfield P/N: 101-00212      

Doc. No. - Rev.: 56-101-00212-D 

Latest Update: Sep/16/14

Sight Compass

Sight Compass

Model: SC063

Barfield P/N: 101-01200

Doc. No. - Rev.: 56-101-01200-E 

Latest Update: Nov/07/14

Turbine Temperature Test Set

Turbine Temperature Test Set

Model: 2312G  

Barfield P/N: 101-00550

Doc. No. - Rev.: 56-101-00550-D 

Latest Update: Nov/07/14

Turbine Temperature Test Set

Turbine Temperature Test Set

Model: TT1000A

Barfield P/N: 101-01901

Doc. No. - Rev.: 56-101-00901-E 

Latest Update: Sep/19/14

Turbine Temperature Test Set

Turbine Temperature Test Set

Model: TT1200

Barfield P/N: 101-00920

Doc. No. - Rev.: 56-101-00920-D  

Latest Update: Nov/07/14

Turbine Temperature Test Set

Turbine Temperature Test Set

Model: TT1200A

Barfield P/N: 101-00930

Doc. No. - Rev.: 56-101-00930-F 

Latest Update: Sep/25/14

Digital Altimeter Instrument

Digital Altimeter Instrument

Model: DALT55

Barfield P/N: 101-02184

Doc. No. - Rev.: 61-101-02184_02186-E  

Latest Update: Jun/25/15

Digital Airspeed Instrument

Digital Airspeed Instrument

Model: DAS650

Barfield P/N: 101-02194

Doc. No. - Rev.: 61-101-02194-G  

Latest Update: Nov/07/14

Pitot-Static Test Set

Pitot-Static Test Set

Model: 1811G/H

Barfield P/N: 101-00165_00168_00169

Doc. No. - Rev.56-101-00165_00168_00169  

Latest Update: Dec/09/14